Änderungen an Schritt Nr. 4
Bearbeitet von Henry Braden Fisk –
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Pull the two halves of the casing apart using your hands. | |
| [* icon_note] Pulling the two halves apart can be difficult the first time because they are so tightly connected, especially at the top. Use a moderate amount of force. | |
| [* icon_reminder] There is a black rubber washer around the lens after you take the casing off. Make sure to replace it when putting the camera back together. | |
| + | [* black] Unscrew the screw in the upper corner of the camera, underneath the top. |
| + | [* black] The screw is accessed through the memory card slot. |