Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 3

Bearbeitet von pollytintop

Wartet auf Freigabe



[* icon_caution] Turn laptop over and open the screen fully. Take care as the screen is still connected to the logic board via black cable on right hinge.
[* black] Use a spudger to release the silver and black plastic cover that forms the hinge covers. Start at one side nearest a hinge and work along the rear of the case, there are 5 tabs to release along the keyboard edge.
[* black] Disconnect LCD cable by lifting straight upwards using the black plastic tabs on the top of the LCD connector. You may need to use a spudger to loosen the connection along the uppermost edge-not along the logicboard.
[* yellow] Remove 2 screws from left and right hinges.
[* orange] Remove 2 screws securing topcase to rear of battery tray.

Bild 2

Alte Version

Neue Version