Änderungen an Schritt Nr. 22

Bearbeitet von GotMac -

Bearbeitung genehmigt von GotMac

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Legs & Antenna Cables
[* black] Carefully pry off the screw covers on the legs that are attached to the lower shell.
[* red] Using a Phillips #000 driverT6 screwdriver, remove the two screws. Repeat on all four corners.
[* red] Using a Phillips #000 driverT6 screwdriver, remove the two screws. Repeat on all four corners.
[* icon_reminder] Take note on where you are removing the cables from, and install them in the new lower shell in the same way you found them.