Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Ben Gottemoller

Bearbeitung genehmigt von Ben Gottemoller

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Inspect your grinder impeller
[* black] First let's verify you have the problem this tutorial is designed to fix. These images show what a bad / worn out BCG600SIL impeller looks like and then what a good impeller looks like. If your grinder has similar wear to the bad picture (and is jamming) then this tutorial will be able to help you.
[* black] Unplug your grinder. Remove the hopper and take the upper burrs out. Empty out any coffee grounds (An air gun or vacuum helps) and then inspect the impeller blades.
[* black] If the impeller can fit through the hole (ie: be removed just by taking out the lower burr) then it definitely needs replacement. A good impeller should not be removable without dis-assembly and the tips of the impeller blades should not even be visible. If yours is between bad and good, make a judgement call using the pictures as a reference.
[* black] FYI: If your impeller is made of '''stainless steel''' rather than plastic (like the picture), your model is NOT the BCG600SIL. In that case, you likely have a newer model with significant design changes. Stainless steel should not wear out and so your problem is elsewhere.

Bild 1

Kein vorheriges Bild

Hinzugefügt

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt