Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 12

Bearbeitet von Ben Gottemoller

Bearbeitung genehmigt von Ben Gottemoller

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Remove upper burr holder
[* black] Back the adjustment limiter screw"stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in!
[* black] The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops.

[* black] Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.
[* black] Back the adjustment limiter screw"stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in!
[* black] The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops.

[* black] Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.
[* black] Remove the upper burr holder, noting the slot orientation for later.