Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 16

Bearbeitet von Ben Gottemoller

Bearbeitung genehmigt von Ben Gottemoller

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Grind adjuster alignment
[* black] Rotate the grind adjuster until the screw in the first pic is near the switch pointed to by the yellow arrow.
[* black] Set the upper-burr-holder in place with the slots matching the illustration in the first photo.
[* black] CRITICAL: Study the second photo. While pressing down with one hand, begin to rotate the grind adjuster in the direction shown by the arrow.
[* black] Continue rotating the adjuster until the upper-burr-holder is all the way down. The stop-screw'''stop-screw should be about where it is in the 3rd picpic''' at this point.
[* black] Continue rotating the adjuster until the upper-burr-holder is all the way down. The stop-screw'''stop-screw should be about where it is in the 3rd picpic''' at this point.