Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 17

Bearbeitet von Ben Gottemoller

Bearbeitung genehmigt von Ben Gottemoller



[title] More grind adjuster alignment
[* black] With the upper-burr-holder all the way down, reverse direction on the grind-adjuster and rotate through 50% to 75% of a rotation.
[* black] Stop when the stop-screw is right above the plastic stop shown in the first picture.
[* black] The lip should be about the height shown in the first and second pic. That's critical for your grind to match up with the labeling on the chrome-adjustment wheel after this is all done.
[* black] Compare the lip height with the photo you took in Step 11. Make sure the gap looks the same.
[* black] Screw the stop-screw back in.