Änderungen an Schritt Nr. 1
Schritt-Zeilen
| - | [* red] Desolder two points |
|---|---|
| - | [* black] On the board there is a dot next to the cathode. In this image it is the right pad. |
| + | [title] Replace the LED |
| + | [* red] Desolder the original LED from the motherboard of the controller. Do this for both sides of the LED until all of the old solder is removed. |
| + | [* black] Solder on your new LED. Make sure it is installed the same way as the old LED, or you can burn out the new LED. |