Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von Gabriel Medina-Kim -

Bearbeitung genehmigt von Gabriel Medina-Kim

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Flip the sensor array over 180 degrees.
[* black] Move'''<PIC> New pic of unremoved/untouched copper tape'''
[* black] '''<PIC> New Pic removing the copper tape'''
[* black] '''<PIC EDIT> Make current pic 1 into pic 3 in series. Possibly crop so it is more zoomed in.'''
[* black] Using tweezers, move
the copper tape covering the camera to the side so you can see the screws holding the camera.
[* black] Move'''<PIC> New pic of unremoved/untouched copper tape'''
[* black] '''<PIC> New Pic removing the copper tape'''
[* black] '''<PIC EDIT> Make current pic 1 into pic 3 in series. Possibly crop so it is more zoomed in.'''
[* black] Using tweezers, move
the copper tape covering the camera to the side so you can see the screws holding the camera.

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version