HP Envy 4-1030us Battery Replacement Schritt Nr.2 Verlauf

Änderungen an Schritt Nr. 2

Bearbeitet von Christopher Luna – 1. Nov 2017

Bearbeitung genehmigt von Christopher Luna

-	[* red] ~~After removing~~ the ~~battery cable,~~ ~~start~~ to remove the three 4.2mm screws that are securing the battery to the board. ~~The locations of the screws are shown in the picture. To remove the screws, an iFixit Philips #0 screwdriver maybe useful.~~
+	[* red] Use the Philips #0 screwdriver to remove the three 4.2mm screws that are securing the battery to the board.