Änderungen an Schritt Nr. 3
Bearbeitet von Tyler Pettenger –
Bearbeitung genehmigt von Tyler Pettenger
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* black] 3. Remove fuse (B.) carefully by gently prying out the ends of the fuse from the receptacle again using the driver with the 2mm flathead. |
|---|---|
| + | [* black] Warning: Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. |