Änderungen an Schritt Nr. 5
Bearbeitet von Parvathy Nambidi –
Bearbeitung genehmigt von Parvathy Nambidi
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* yellow] Move the ribbon cable to the side. | |
| - | [* green] Use the flat end of a spudger to disconnect the battery cable from its socket in the logic board. |
| - | [* black] Locate the battery and the three 4.00 mm Phillips-head screws that hold it in place. |
| - | [* light_blue] Unscrew and remove the three screws. |
| - | [* black] Lift the battery up and remove. |
| - | [* icon_caution] Removing the battery can dislodge the touchpad bracket. Place it carefully over the alignment pins. |