Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Michael Laing -

Bearbeitung genehmigt von Michael Laing

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Starting along the edge opposite of the hinge, insert the spudger between the screen and the backing to separate the back.
-[* black] Work along the edge and then up the sides.
-[* black] There is adhesive underneath the slot for the SD card so you will need to apply some force to break the adhesive.
-[* black] As the back is separated from the device, be careful to not lose the power button. It may come loose and fall out.
+[* black] Starting along the edge opposite of the hinge, insert the spudger between the screen and the backing to begin separating them.
+[* black] Work along the edge and then up the sides with the spudger to separate the small clips holding the backing on.
+[* black] There is adhesive underneath the slot for the SD card so you will need to slowly apply some force to break the adhesive.
+[* icon_caution] As the back is separated from the device, be careful to not lose the power button. It may come loose and fall out.