Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Nicklaus Krems -

Bearbeitung genehmigt von Nicklaus Krems

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Starting along the edge opposite of the hinge, insert a plastic spudger between the screen and the backing to begin separating the small clips holding the backing on.
-[* black] Work along the edge and then up the sides, separating the clips with the spudger.
+[* black] Work along the edge and then up the sides, separating the clips with a plastic opening tool.
[* icon_note] There is adhesive underneath the slot for the SD card so you will need to slowly apply some force to break the adhesive.
[* icon_caution] As the back is separated from the device, be careful to not lose the power button. It may come loose and fall out.