Änderungen an Schritt Nr. 5

Bearbeitet von Christopher Hill -

Bearbeitung genehmigt von Jake Devincenzi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] With the display panel still lifted, disconnect the four inverter cables.
[* icon_reminder] During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.
[* icon_note] During reassembly, the order of the inverter cables is interchangeable within each socket.
[* black] If you are replacing a hard drive and have an extra set of hands, I found it easy enough to reach in and remove the drive without disconnecting anything but the LCD temp and display connector in the previous step by having someone hold the LCD in its propped position.