Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Using the Philips #00 Screwdriver, unscrew and remove the four 9mm black screws on the base plate of the device.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Using the plastic opening tool, insert into the crack between the base plate and the main body of the device
-
Using a lever like motion, push the opening tool down thus lifting the plate
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Unscrew the two 10mm silver phillips screws holding the motherboard in place on the inside of the device.
-
Use the plastic opening tool to pry the motherboard out of the device housing.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Unsolder the red and black wires connecting the speaker to the motherboard.
-
Flip the motherboard over.
-
Unsolder the red and black wires connecting the battery to the motherboard.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove the plastic cover from the power switch actuator on the motherboard.
-