Zum Hauptinhalt wechseln

iMac Intel 20" EMC 2266 RAM Replacement

Was du brauchst

  1. iMac Intel 20" EMC 2266 RAM Replacement, Access Door: Schritt 1, Bild 1 von 1
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

  2. iMac Intel 20" EMC 2266 RAM Replacement, RAM: Schritt 2, Bild 1 von 2 iMac Intel 20" EMC 2266 RAM Replacement, RAM: Schritt 2, Bild 2 von 2
    • Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  3. iMac Intel 20" EMC 2266 RAM Replacement: Schritt 3, Bild 1 von 1
    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

Abschluss

To reassemble your device, follow these instructions in reverse order.

91 weitere Nutzer:innen haben diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 8

Letzte 30 Tage: 27

Insgesamt: 37,635