Zum Hauptinhalt wechseln

iMac Intel 21.5" EMC 2308 RAM Replacement

Was du brauchst

  1. iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: Schritt 1, Bild 1 von 2 iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: Schritt 1, Bild 2 von 2
    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

  2. iMac Intel 21.5" EMC 2308 RAM Replacement, RAM: Schritt 2, Bild 1 von 1
    • Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.

  3. iMac Intel 21.5" EMC 2308 RAM Replacement: Schritt 3, Bild 1 von 2 iMac Intel 21.5" EMC 2308 RAM Replacement: Schritt 3, Bild 2 von 2
    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

Abschluss

To reassemble your device, follow these instructions in reverse order.

111 weitere Nutzer:innen haben diese Anleitung absolviert.

Ein Kommentar

There needs to be a little bit of important discucssion about getting the new RAM properly seated into the slots. Otherwise, great instructions!

Mary - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 22

Letzte 30 Tage: 110

Insgesamt: 88,744