Zum Hauptinhalt wechseln

Einleitung

Prereq only for stripping down the logic board.

  1. The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
    • The SATA data connector has a clip that must be pressed to allow removal.

    • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

  2. Grasp the hard drive power connector and gently pull it out of its socket on the logic board. Grasp the hard drive power connector and gently pull it out of its socket on the logic board.
    • Grasp the hard drive power connector and gently pull it out of its socket on the logic board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Mitglied seit: 05.02.2015

213.064 Reputation

178 Anleitungen geschrieben

Team

The Home Depot Mitglied von The Home Depot

Community

8.921 Mitglieder

1.023 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 49