Einleitung
Prereq only for removing the front panel.
Was du brauchst
-
-
Remove the four 2.0 mm Phillips #0 screws securing the LCD to the rear case.
-
-
-
-
The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.
-
Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.
-
Set the LCD face down on the front panel.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
