iPad 3 4G Logic Board Stecker ersetzen

Einleitung

Internal prereq.

Schritt 1 Logic Board Stecker

iPad 3 4G Logic Board Stecker ersetzen, Logic Board Stecker: Schritt 1, Bild 1 von 1

Trenne die folgenden Stecker aus ihren entsprechenden Fassungen auf dem Logic Board:
Wi-Fi Antennenkabel
Lautsprechersteckerkabel
Dockanschlusskabel
Achte darauf, unter dem Stecker zu hebeln und nicht an der Fassung selbst. Hebeln an der Fassung kann erheblichen Schaden verursachen.

It is very sensitive the Logic Board Connectors of the Speakers... So it came off to me... So I need some advise to put it back... I am not sure if it was soldier to two points or it is just glue to the main board with the contacts aligned to the mother board contacts... Please I need some advise or help... Thanks

Eduardo - 2. Apr 2015 Antwort

DO NOT PRY under the speaker connector (under the orange rectangle in the photo). Doing so will pry off the motherboard speaker connector as I and poster above did. The instructions for step is very misleading, telling you to pry EVERYTHING. My motherboard is shot, and now I need to buy another speaker. :-(

Robert Tau - 15. Okt 2015 Antwort

*EDIT* The proper place to pry is from under the speaker plug, from the edge of the motherboard. I pried under the motherboard speaker connector, which lifted the socket off the motherboard. When in doubt, view the video from iFixit on YouTube. This will show you where to pry. Good luck!

Robert Tau - 13. Sep 2016

I ended up prying up the connector, too. Is there any way this can be repaired?

dave - 28. Mär 2017 Antwort