Einleitung
Internal Prereq.
Was du brauchst
-
-
Löse und entferne das Stück Tape, das den ZIF Stecker des SIM Platinenkabels bedeckt.
-
Klappe die Haltelasche des ZIF Steckers um.
-
Ziehe das SIM Platinenkabel mit einer Spudgerspitze gerade aus seiner Fassung auf dem Logic Board.
-
-
Fast fertig!
Ziellinie
Besonderer Dank geht an diese Übersetzer:innen:
en de
100%
Jasper Fleischhauer hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›
I found it easier to remove the 7 screws first in step 42 then gently pull the logic board towards you freeing the SIM board cable.
Rich1981 - Antwort
This cable is really fragile, I found it easier to flip the retaining flap then remove all 7 screws in step 42 then gently pull the logic board toward you freeing the SIM board cable.
Rich1981 - Antwort
For me, it was impossible to accomplish this step without first removing the 7 screws from the Logic Board and disconnecting the Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Then, I could slide the Logic Board downward just enough to pull free the SIM cable. When reassembling, I attached the 3 antenna connectors first, then the SIM cable, before installing the 7 screws and Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Went a bit easier.
robk64 - Antwort
Thanks for your advice! Definitely best doing it during step 43!
coccia.stefano - Antwort