Zum Hauptinhalt wechseln

Was du brauchst

Dieser Teardown ist keine Reparaturanleitung. Um dein iPad ClamCase zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. iPad ClamCase, iPad ClamCase: Schritt 1, Bild 1 von 2 iPad ClamCase, iPad ClamCase: Schritt 1, Bild 2 von 2
    • You can skip the first 2 steps if you don't want to detach the upper and keyboard covers from each other.

    • Open the case and unpeel the 2 black stickers in the top corners of the keyboard.

    • This will reveal the 6 screws that attach the upper cover to the keyboard cover.

  2. iPad ClamCase: Schritt 2, Bild 1 von 2 iPad ClamCase: Schritt 2, Bild 2 von 2
    • Use the T9 Torx screwdriver to unscrew the 2 bigger screws in the middle of each side.

    • Use the T6 Torx screwdriver to unscrew the remaining 4 screws.

  3. iPad ClamCase: Schritt 3, Bild 1 von 2 iPad ClamCase: Schritt 3, Bild 2 von 2
    • Turn the keyboard cover over so the bottom is facing up. Manually remove the thin black covering that is attached to the bottom.

    • Be patient, the thin black covering might be really stuck to the bottom.

  4. iPad ClamCase: Schritt 4, Bild 1 von 1
    • Once the thin black covering is removed, you will see 15 screws.

    • Use the T6 Torx screwdriver to remove the screws.

  5. iPad ClamCase: Schritt 5, Bild 1 von 1
    • Once the screws are removed, lift off the bottom panel to access the keyboard and battery.

  6. iPad ClamCase: Schritt 6, Bild 1 von 1
    • You are done.

2 Kommentare

Awesome! I used this guide to disassemble my clam case and repair some nonfunctional keys. Thanks!

justin duff - Antwort

Thanks for the dis-assembly guide. Justin, what did you have to do to fix the keys that were not working. I have on with a few keys not working, not even intermittently.

dick haynes - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 11

Insgesamt: 7,720