Zum Hauptinhalt wechseln

iPad Mini 2 Wi-Fi Front Panel Austausch

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. iPad Mini 2 Wi-Fi Front Panel Austausch, Front Panel: Schritt 1, Bild 1 von 2 iPad Mini 2 Wi-Fi Front Panel Austausch, Front Panel: Schritt 1, Bild 2 von 2
    • Hebe den Stecker des Digitizer-Kabels mit dem flachen Ende des Spudgers gerade aus seinem Anschluss heraus .

    • Sei beim Herausheben des Steckers aus dem Anschluss besonders vorsichtig - die Kontakte im Anschluss sind sehr empfindlich und gehen leicht kaputt!

  2. iPad Mini 2 Wi-Fi Front Panel Austausch: Schritt 2, Bild 1 von 3 iPad Mini 2 Wi-Fi Front Panel Austausch: Schritt 2, Bild 2 von 3 iPad Mini 2 Wi-Fi Front Panel Austausch: Schritt 2, Bild 3 von 3
    • Schiebe den Spudger unter die Platine des Digitizers auf der Seite mit dem Akku und beginne sie vom Rückgehäuse abzulösen.

    • Hebe die Platine hoch, um sie vom restlichen Kleber zu trennen.

  3. iPad Mini 2 Wi-Fi Front Panel Austausch: Schritt 3, Bild 1 von 1
    • Hebe das Front Panel hoch und entferne es vom iPad.

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.

10 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Sam Goldheart

Mitglied seit: 10/18/12

465.122 Reputation

538 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

135 Mitglieder

16.476 Anleitungen geschrieben

2 Kommentare

I'll give this quide a 3/5. The problem is the end where you just say reverse the steps. That is an easy out that too many people use. There are important things to do when re-assembling that are not pointed out that may come back to bite you just attempting to reverse the steps. I do like the stepped pictures showing before and after views. Overall the process is not that bad other than removing the broken glass which breaks a lot more as you go. A hair dryer on high worked fine for warming up the glue, you just need to be aware of cleaning the area of glass bits before turning it on. Glad I didn't pay somebody big bucks to do this job.

italternatives - Antwort

Due reassebling its really important to bend the digitizer cable with a spudger inside the case. If you just press the Front down the cable will be between adhensive and case. So near the home button, it won't fit very well!!

itf7o - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 6,525