Einleitung
Prerequisite guide for accessing upper components in an iPad mini 4 LTE.
Was du brauchst
-
-
Run the pointed end of a spudger between the looped tape and the plastic cellular antenna housing to make it easier to peel the tape up.
-
-
-
Use tweezers to peel up the looped tape adhered over the upper component cable bracket.
-
-
-
-
Remove the following four Phillips screws holding the upper component bracket in place:
-
Two 2.1 mm screws
-
Two 1.2 mm screws
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
