Gemeinsam reparieren - Jetzt registrieren

Einleitung

Removal steps for the earpiece speaker in the iPhone 16 Pro Max.

Was du brauchst

Use the point of a spudger to pry up and disconnect the earpiece speaker connector.

Frag FixBot

In diesem Schritt verwendetes Werkzeug:

Standoff Screwdriver for iPhones

$5.49

Kaufen

Remove the six screws securing the earpiece speaker:
One 2.4 mm‑long Phillips screw
Three 1.3 mm‑long Phillips screws
One 1.6 mm‑long Phillips screw
One 3.3 mm‑long standoff screw
Standoff screws are best removed using a dedicated standoff driver or driver bit. In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Frag FixBot

Use tweezers to lift and remove the earpiece speaker.
You may feel some resistance near the top edge, where the speaker gasket seals against the frame. Pull the speaker out gently to release the seal.