Zum Hauptinhalt wechseln

iPhone 6 Plus Rear Facing Camera Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. iPhone 6 Plus Rear Facing Camera Replacement, Rear Facing Camera: Schritt 1, Bild 1 von 1
    • Remove the following screws securing the rear-facing camera bracket to the rear case:

    • One 1.7 mm Phillips #00 screw

    • One 2.3 mm Phillips #00 screw

  2. iPhone 6 Plus Rear Facing Camera Replacement: Schritt 2, Bild 1 von 1
    • Lift and remove the rear-facing camera bracket out of the iPhone.

  3. iPhone 6 Plus Rear Facing Camera Replacement: Schritt 3, Bild 1 von 1
    • Use the flat end of a spudger to disconnect the rear-facing camera connector from its socket on the logic board.

  4. iPhone 6 Plus Rear Facing Camera Replacement: Schritt 4, Bild 1 von 1
    • Carefully lift and remove the rear-facing camera out of the iPhone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 517