Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

Prereq only, battery and logic board removed.

  1. Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker. Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker.
    • Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker.

  2. To fully de-route the antenna connector, you may need to gently pull back the metal clip securing it to the speaker assembly.
    • To fully de-route the antenna connector, you may need to gently pull back the metal clip securing it to the speaker assembly.

  3. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  4. Remove the following screws securing the speaker to the rear case:
    • Remove the following screws securing the speaker to the rear case:

    • One 2.3 mm Phillips #00 screw

    • One 2.8 mm Phillips #00 screw

  5. Lift and remove the speaker out of the iPhone.
    • Lift and remove the speaker out of the iPhone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 198