Repariere deine Sachen Community Store

iPhone 6 iSclack Opening Procedure

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Einleitung

Prereq for display assembly.

Was du brauchst

  1. iPhone 6 iSclack Opening Procedure, iSclack Opening Procedure: Schritt 1, Bild 1 von 1

    • The next three steps demonstrate using the iSclack, a great tool for safely opening the iPhone 6 that we recommend for anyone doing more than one repair. If you aren't using the iSclack, skip down three steps for an alternate method.

    • If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone 6.

    • Close the handle on the iSclack, opening the suction-cup jaws.

    Übersetzen

  3. iPhone 6 iSclack Opening Procedure: Schritt 2, Bild 1 von 2 iPhone 6 iSclack Opening Procedure: Schritt 2, Bild 2 von 2

    • Place the bottom of your iPhone in between the suction cups.

    • Position the iSclack's upper suction cup against the display, just above (but not covering) the home button.

    • Open the handles to close the jaws of the iSclack. Center the suction cups and press them firmly onto the top and bottom of the iPhone.

    • If your display or back glass is badly cracked, covering it with a layer of clear packing tape may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.

    Übersetzen

  4. iPhone 6 iSclack Opening Procedure: Schritt 3, Bild 1 von 2 iPhone 6 iSclack Opening Procedure: Schritt 3, Bild 2 von 2

    • Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

    • The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the display cables.

    • Peel the two suction cups off your iPhone.

    • Skip the next three steps and continue on to Step 8.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 935