iPhone 7 Logic Board Anschlüsse trennen

Einleitung

Grundständige Anleitung

Was du brauchst

Schritt 1 Logic Board Anschlüsse

iPhone 7 Logic Board Anschlüsse trennen, Logic Board Anschlüsse: Schritt 1, Bild 1 von 2

iPhone 7 Logic Board Anschlüsse trennen, Logic Board Anschlüsse: Schritt 1, Bild 2 von 2

Benutze das flache Ende eines Spudgers, um den Anschluss der Rückkamera zu trennen.

Übersetzen

Schritt 2

Entferne die folgenden Kreuzschlitzschrauben, mit denen die Halterung der Rückkamera am Rückgehäuse befestigt ist:
Eine 1,3 mm Schraube
Eine 2,5 mm Schraube

Übersetzen

I couldn’t get my 1.3mm screw out. It’s not required thankfully as you can just bend the cover up and out of the way to complete the rest of the steps.

Ray Bieze - 18. Nov 2019 Antwort

i removed them with PH000

Flavien - 30. Jan 2021 Antwort

Schritt 4

Heble den Stecker am Antennenkabel direkt links neben dem Rückkameramodul mit der Spudgerspitze hoch und löse ihn ab.

Übersetzen

There is one Step missing before removing the flash light cable: Remove Camera cable, right?

Achim Breidenbach - 12. Feb 2020 Antwort

I broke this and can’t find it on amazon. Is it part of the volume control flash connector? If not, can you send me a link on where to find this connector,…and possible instructions on how to replace?

Daniel Buhler - 20. Sep 2020 Antwort

Schritt 5

Entferne die beiden 1,2 mm Tri-point Schrauben, mit denen die obere Kabelhalterung befestigt ist.

Übersetzen

these are too tight cant get rid off them from y000

Narendra Mane - 1. Jul 2020 Antwort

ok with Y000 from pro tool kit

Flavien - 30. Jan 2021 Antwort

Had to push down to get the Y000 in place

Cynthia Lamb - 1. Mär 2021 Antwort

Schritt 6

Entferne die obere Kabelhalterung.

Übersetzen

Schritt 7

Verwende das flache Ende eines Spudgers, um den oberen Kabelstecker zu trennen.

Übersetzen

Este cable q funciona tiene porfavor lo desconecte y funciona normal

Johnny Bolaños - 2. Mai 2020 Antwort

Schritt 8

Entferne die vier Kreuzschlitzschrauben, mit denen die Wlan-Antenne befestigt ist:
Drei 1,2 mm Schrauben
Eine 1,7 mm Schraube

Übersetzen

I lost one of these 1.2 mm screws. Will that affect the signal reception?

Bethany Knaebel - 12. Aug 2019 Antwort

There is another screw connecting the antenna to the case.

tbaiello - 21. Nov 2019 Antwort

How do you open the 1.7mm screw? LOL

Kyle Victor - 29. Dez 2019 Antwort

The screws are not threading in for some reason. I measured the screws to be exactly 1.2mm with a caliper.

Loopy75 - 5. Jan 2020 Antwort

Yes there are 4 x screw 3 x 1.2mm and 1x 1.7mm securing the antenna to the case

ANDREW - 29. Jan 2020 Antwort

Yes : 4 screws and not 3 !!

sirthomasnardin - 22. Jan 2021

Schritt 9

Entferne die linke obere Antenne.

Übersetzen

** also remove the small Phillips screw fastening the WiFi antenna to the top rear casing of the phone

iBroke - 5. Dez 2018 Antwort

Schritt 10

Entferne die folgenden Kreuzschlitzschrauben:
Eine 1,3 mm Schraube
Eine 2,2 mm Schraube

Übersetzen

Möglicherweise muss man den Kleber zuerst entfernen!

Evan Winter - 2. Aug 2023 Antwort

Schritt 11

Entferne die Halterung.

Übersetzen

What's this bracket called

Cris Velasquez - 10. Sep 2018 Antwort

%#*@, lost that part during the job, thought it’d be alright without it. Couple days later figured out NFC doesn’t work anymore. Any ideas on where to get this part from, colleagues?

azowux - 14. Nov 2018 Antwort

Schritt 12

In diesem Schritt verwendetes Werkzeug:

Standoff Screwdriver for iPhones

Kaufen

Entferne die 2,2 mm Abstandsschraube von der Erdungsklammer.
Abstandsschrauben werden am besten mit einem Schraubendreher für Abstandsschrauben entfernt.
Zur Not geht es auch mit einem kleinen Flachschraubendreher, du musst dabei aber aufpassen, dass du nicht abrutschst und umliegende Bauteile beschädigst.

Übersetzen

What bit is this? The link doesn’t use the same name.

Mike Moran - 23. Okt 2018 Antwort

I didn’t even have an eyeglass repair kit flathead, so I hit the end of a paperclip with a hammer to make a flathead, and it works!

Ark - 27. Dez 2018 Antwort

I hate getting the deep into a repair to find there’s a tool missing. This bit should be part of the toolkit!

Ark - 27. Dez 2018 Antwort

Its in the toolkit now. Looks like a Philips head but up close the end is squared off with a point in the middle.

Jesse de Vries - 21. Mai 2020

I received two boxes - one box contained the repair part, the other was the tool kit. I only opened the tool kit before disassembling the phone. The standoff screwdriver bit was not in there. Neither was the guitar pick. I used a real guitar pick and a small standard screwdriver from my toolbox. When I was ready to reassemble, I opened the repair part box and guess what was in there - the standoff screwdriver bit and guitar pick. So, I guess if you just order the part it will come with (at least) those two tools. The tool kit contains tweezers, suction cup, three screwdriver bits (tri-point, pentalobe, and phillips) and screwdriver handle, a long black spudger with a flat end and a pointy end, and a smaller, thicker spudger with a wide, flat ends.

bronyaur - 19. Mai 2019 Antwort

The flat end of the spudger works a treat too.

Robert Trammel - 2. Sep 2019 Antwort

Thank you, bronyar. Since there is a box labeled “Repair Tools”, I never would have looked in the parts box for tools. I was able to use the standoff tool to takie the phone apart, not just to put it back together.

Mike Ruzicka - 20. Jun 2020 Antwort

I used standoff bit for iPhone from my pro tool kit

Flavien - 30. Jan 2021 Antwort

Schritt 13

Mit einer Pinzette kannst du den Endungswinkel des Logic Boards vorsichtig aus dem Weg biegen.

Übersetzen

I accidentally broke the grounding bracket, is it very important to get a new one to replace? as I can't seem to find them for sale anywhere

Mustifa shah - 21. Jan 2020 Antwort

I also broke it. Did your phone work after?

Did you find a replacement?

Ben Schorr - 20. Feb 2020 Antwort

Did your phone work ?

Emin - 21. Mai 2021

also broken does it work without?

Emin - 21. Mai 2021 Antwort

I broke mine while doing this step. A bit confusing. You’re just supposed to bend it out the way, not pull on it entirely. Will the phone still work without this?

Chandler Forrest - 20. Dez 2021 Antwort

$@$*, i broke the grounding bracket

Z1xus - 22. Mai 2022 Antwort

I just didnt bend this one.. Ill tell you how it went

Lauren Campbell - 13. Okt 2022 Antwort