Einleitung
Prereq for removing the speaker or wi-fi diversity antenna.
Was du brauchst
-
-
Remove the Phillips screw securing the Wi-Fi diversity antenna to the rear case:
-
One 3.2 mm screw
-
-
-
Remove the following three Phillips screws securing the speaker to the rear case:
-
Two 1.3 mm screws
-
One 2.0 mm screw
-
-
-
Use the point of a spudger to lift the two antenna cable connectors up off of the sockets on the logic board.
-
-
-
-
Use tweezers to derout the antenna cables from their bracket on the logic board.
-
-
-
Use the tip of a spudger to slide the speaker assembly towards the logic board and off of the rear case.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
