Repariere deine Sachen Community Store

iPhone XS Pentalobe Screws Replacement

Einleitung

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Was du brauchst

  1. iPhone XS Pentalobe Screws Replacement, Pentalobe Screws: Schritt 1, Bild 1 von 1

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

14 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

Jeff Suovanen

Mitglied seit: 08/06/13

428.055 Reputation

259 Anleitungen geschrieben

Auszeichnungen: 48

+ 45 weitere Auszeichnungen

Team

iFixit Mitglied von iFixit

Staff

135 Mitglieder

16.767 Anleitungen geschrieben

2 Kommentare

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - Antwort

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 48

Letzte 30 Tage: 161

Insgesamt: 12,946