Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Replace that faulty logic board to restore functionality to a broken iPod Shuffle.
Was du brauchst
-
-
Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
-
-
-
Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
-
-
-
Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
-
Pry the rear case away from the front case.
-
-
-
-
Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.
-
-
-
Peel the battery up from the front case with an iPod opening tool.
-
Remove the logic board and battery from the iPod.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
