Zum Hauptinhalt wechseln

Einleitung

If your Roomba is having performance issues or is not picking up enough dirt, use this guide to remove and clean/replace its side sweeper. The side sweeper is designed to guide dirt into the main brush. Its close proximity to the outer edge of the Roomba 560 makes it easy for hair and dirt to damage and clog the sweeper.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Flip the Roomba upside down.
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips JIS #1 driver.

  2. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen
  3. Lift the yellow side sweeper, removing it from the device.
    • Lift the yellow side sweeper, removing it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Mairead Blaes

Mitglied seit: 01.10.2015

666 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 1-22, Maness Fall 2015 Mitglied von Cal Poly, Team 1-22, Maness Fall 2015

CPSU-MANESS-F15S1G22

4 Mitglieder

14 Anleitungen geschrieben

I need to replace the part on the bottom where the side sweeper screws in. The threads are stripped, I’m guessing, and screw won’t stay in.

Candy Schnurr - Antwort

put some hot glue or melt some plastic in the hole before screwing it. you should get the threads back when you unscrew it

Nicolas Sicard -

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 570