Zum Hauptinhalt wechseln


If your Roomba is having performance issues or is not picking up enough dirt, use this guide to remove and clean/replace its side sweeper. The side sweeper is designed to guide dirt into the main brush. Its close proximity to the outer edge of the Roomba 560 makes it easy for hair and dirt to damage and clog the sweeper.



Keine Ersatzteile angegeben.

  1. iRobot Roomba 560 Side Sweeper Replacement, Side Sweeper: Schritt 1, Bild 1 von 1
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.

  2. iRobot Roomba 560 Side Sweeper Replacement: Schritt 2, Bild 1 von 1
    • Lift the yellow side sweeper, removing it from the device.


To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Mairead Blaes

Mitglied seit: 01.10.2015

786 Reputation

4 Anleitungen geschrieben


Cal Poly, Team 1-22, Maness Fall 2015 Mitglied von Cal Poly, Team 1-22, Maness Fall 2015


4 Mitglieder

14 Anleitungen geschrieben

2 Kommentare

I need to replace the part on the bottom where the side sweeper screws in. The threads are stripped, I’m guessing, and screw won’t stay in.

Candy Schnurr - Antwort

put some hot glue or melt some plastic in the hole before screwing it. you should get the threads back when you unscrew it

Nicolas Sicard -

Kommentar hinzufügen


Letzten 24 Stunden: 2

Letzten 7 Tage: 15

Letzten 30 Tage: 47

Insgesamt: 1,160