Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

iRobot Roomba 560 Side Sweeper Replacement

Was du brauchst

  1. iRobot Roomba 560 Side Sweeper Replacement, Side Sweeper: Schritt 1, Bild 1 von 1
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips JIS #1 driver.

  2. iRobot Roomba 560 Side Sweeper Replacement: Schritt 2, Bild 1 von 1
    • Lift the yellow side sweeper, removing it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 1-22, Maness Fall 2015 Mitglied von Cal Poly, Team 1-22, Maness Fall 2015

CPSU-MANESS-F15S1G22

4 Mitglieder

14 Anleitungen geschrieben

2 Kommentare

I need to replace the part on the bottom where the side sweeper screws in. The threads are stripped, I’m guessing, and screw won’t stay in.

Candy Schnurr - Antwort

put some hot glue or melt some plastic in the hole before screwing it. you should get the threads back when you unscrew it

Nicolas Sicard -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 20

Insgesamt: 1,666