Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

The front caster wheel is the wheel that leads the Roomba over all of the dirt and debris so that the vacuum can pick it up. As a result, the caster wheel easily becomes dirty. The purpose of this guide is to show you how to take out the caster wheel so that it can be cleaned and restored to a satisfactory condition.

  1. Flip the device over onto its back. Find the side brush, and unscrew the single screw that connects to brush motor  by using the Phillips head #2 screwdriver.
    • Flip the device over onto its back.

    • Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.

    • This screw doesn't completely come out of the yellow side brush.

  2. Using a Phillips #1 screwdriver, remove the four screws on the back panel. Once the screws are loose gently pry the back plate away from the body by using the spudger tool.
    • Using a Phillips #1 screwdriver, remove the four screws on the back panel.

    • Once the screws are loose gently pry the back plate away from the body by using the spudger tool.

    • The screws don't completely come out of the panel, but it will still come apart once unscrewed.

  3. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling. Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing. Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.
    • Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling.

    • Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing.

    • Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.

  5. Firmly hold the caster wheel housing, and remove the caster wheel from its setting. Clean the caster wheel with soap and water.
    • Firmly hold the caster wheel housing, and remove the caster wheel from its setting.

    • Clean the caster wheel with soap and water.

    • Once the caster wheel is clean and thoroughly dried, repeat the process in reverse order to reinstall the caster wheel back to the Roomba.

Abschluss

To reassemble the robot, follow these instructions in reverse order.

Rhett

Mitglied seit: 22.01.2015

1.121 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 21-20, Maness Winter 2015 Mitglied von Cal Poly, Team 21-20, Maness Winter 2015

CPSU-MANESS-W15S21G20

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 11

Letzten 7 Tage: 11

Letzten 30 Tage: 59

Insgesamt: 2,280