Einleitung
This guide will show you how to access the caster wheel on the iRobot Roomba e5 so that it can be cleaned or replaced. Most of the time this wheel only needs to be cleaned. Debris may get caught not allowing the wheel to rotate. Often, hair gets caught in the wheel.
Was du brauchst
-
-
Use an opening tool to pry beneath the grey ring on each side of the wheel until it pops out.
-
-
-
-
Remove two 10 mm screws from the wheel housing using a Phillips #1 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.