Einleitung
The camera is attached to the motherboard in your phone. A T6 screwdriver is needed to access the camera.
Was du brauchst
-
-
-
Using a T6 Torx Screwdriver, unscrew and remove the six screws shown in the picture.
-
-
-
Place the circuit board on a firm, static free surface (no cloth/carpet).
-
NOTE: The circled alignment notch points to the left.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.