Zum Hauptinhalt wechseln
Hilfe

iMac Intel 20" EMC 2133 and 2210 Left Speaker Replacement

Restore balanced sound to your iMac by replacing the left speaker.

Schritt 1 Left Speaker  ¶ 

Disconnect the left speaker cable connector from the audio board by pulling it straight away from its socket.

Schritt 1 Left Speaker  ¶ 

  • Disconnect the left speaker cable connector from the audio board by pulling it straight away from its socket.

  • Pull the connector parallel to the face of the logic board.

Schritt 2  ¶ 

De-route the left speaker cable from the channel in the CPU fan. Continue completely de-routing the cable through the undersides of the IR board and heat sink.

Schritt 2  ¶ 

  • De-route the left speaker cable from the channel in the CPU fan. Continue completely de-routing the cable through the undersides of the IR board and heat sink.

Schritt 3  ¶ 

Disconnect the ambient temperature sensor cable by pulling its connector straight up off the logic board.

Schritt 3  ¶ 

  • Disconnect the ambient temperature sensor cable by pulling its connector straight up off the logic board.

Schritt 4  ¶ 

If necessary, de-route the ambient temperature sensor cable from under the power button cables.

Schritt 4  ¶ 

  • If necessary, de-route the ambient temperature sensor cable from under the power button cables.

Schritt 5  ¶ 

Remove the single 28 mm T10 Torx screw securing the left speaker to the rear case. Lift the left speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.

Schritt 5  ¶ 

  • Remove the single 28 mm T10 Torx screw securing the left speaker to the rear case.

  • Lift the left speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.