Zum Hauptinhalt wechseln
Hilfe

Acer Chromebook CB5-571-C5XU Fan Replacement

This guide is to help replace a noisy, broken, or damaged fan.

  • Autor: Erin Moffatt
  • Geschätzte Zeit: 20 - 25 Minuten
  • Schwierigkeitsgrad: Moderat

One of the device's most important parts is the fan, as it helps keep the processor cooled and stops the computer from overheating. A fan might need to be replaced due to it being noisy, broken, or damaged, and this guide will help replace the fan.

Abschnitte
Werkzeuge

Schritt 1 Fan  ¶ 

Using a Phillips  #0 screwdriver,  unscrew the screw to the right of the fan. Remember to have a small container to place the screw in, so it does not get lost.

Schritt 1 Fan  ¶ 

  • Using a Phillips #0 screwdriver, unscrew the screw to the right of the fan.

  • Remember to have a small container to place the screw in, so it does not get lost.

Schritt 2  ¶ 

Using the Phillips #0 screwdriver, unscrew the  four screws connecting the heatsink to the motherboard. Remember to have a safe place to place the screws, so none of them get lost.

Schritt 2  ¶ 

  • Using the Phillips #0 screwdriver, unscrew the four screws connecting the heatsink to the motherboard.

  • Remember to have a safe place to place the screws, so none of them get lost.

Schritt 3  ¶ 

Carefully unhook the black and white wires from the circumference of the fan. It might help to use the pointed end of the spudger tool to unhook the wires. Do not tug too hard on the wires, as they can easily disconnect and snap off from the motherboard.

Schritt 3  ¶ 

  • Carefully unhook the black and white wires from the circumference of the fan.

  • It might help to use the pointed end of the spudger tool to unhook the wires.

  • Do not tug too hard on the wires, as they can easily disconnect and snap off from the motherboard.

Schritt 4  ¶ 

Using the spudger tool, carefully remove the wires connecting the fan to the motherboard. Using the spudger tool, carefully remove the wires connecting the fan to the motherboard.

Schritt 4  ¶ 

  • Using the spudger tool, carefully remove the wires connecting the fan to the motherboard.

Schritt 5  ¶ 

Using the flat side of the spudger, firmly pry the fan off of the components, as well as the heatsink from the motherboard. Using the flat side of the spudger, firmly pry the fan off of the components, as well as the heatsink from the motherboard.

Schritt 5  ¶ 

  • Using the flat side of the spudger, firmly pry the fan off of the components, as well as the heatsink from the motherboard.