Zum Hauptinhalt wechseln
Hilfe

Wahl Professional Designer Blade Adjustment Lever Replacement

This guide will show you how to properly replace the blade adjustment level on the Wahl Professional Designer.

  • Autor: Sophia Swearengin
  • Geschätzte Zeit: 2 Minuten
  • Schwierigkeitsgrad: Sehr einfach

Use this guide to replace the blade adjustment lever on your device.

Schritt 1 Blade Adjustment Lever  ¶ 

Unscrew the 12 mm Phillip head screw located on the blade adjustment lever using a Phillip's #1 screwdriver.  Remove screw from groove to release lever. Unscrew the 12 mm Phillip head screw located on the blade adjustment lever using a Phillip's #1 screwdriver.  Remove screw from groove to release lever. Unscrew the 12 mm Phillip head screw located on the blade adjustment lever using a Phillip's #1 screwdriver.  Remove screw from groove to release lever.

Schritt 1 Blade Adjustment Lever  ¶ 

  • Unscrew the 12 mm Phillip head screw located on the blade adjustment lever using a Phillip's #1 screwdriver. Remove screw from groove to release lever.