Zum Hauptinhalt wechseln
Hilfe

iPhone 8 Display Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prerequisite-only guide for detaching the display assembly on the iPhone 8.

Prerequisite-only guide for detaching the display assembly on an iPhone 8.

Schritt 1 Display Assembly  ¶ 

Use the point of a spudger to pry the lower display connector out of its socket. To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

Schritt 1 Display Assembly  ¶ 

  • Use the point of a spudger to pry the lower display connector out of its socket.

  • To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

Schritt 2  ¶ 

Use the point of a spudger to disconnect the second lower display cable. Use the point of a spudger to disconnect the second lower display cable.

Schritt 2  ¶ 

  • Use the point of a spudger to disconnect the second lower display cable.

Schritt 3  ¶ 

Remove the three 1.3 mm Phillips screws securing the bracket over the front panel sensor assembly connector. Remove the bracket.

Schritt 3  ¶ 

  • Remove the three 1.3 mm Phillips screws securing the bracket over the front panel sensor assembly connector.

  • Remove the bracket.

Schritt 4  ¶ 

Use the point of a spudger to disconnect the  front panel sensor assembly connector. Use the point of a spudger to disconnect the  front panel sensor assembly connector.

Schritt 4  ¶ 

  • Use the point of a spudger to disconnect the front panel sensor assembly connector.

Schritt 5  ¶ 

Remove the display assembly.

Schritt 5  ¶