Zum Hauptinhalt wechseln
Hilfe

Shark Rocket Powerhead AH401 Panel Screws Replacement

This prerequisite guide will show you how to remove the panel of Shark Rocket Powerhead AH401.

  • Autor: Toan Pham
  • Geschätzte Zeit: 2 - 5 Minuten
  • Schwierigkeitsgrad: Einfach

To access the motors, the belt, and the motherboard of the vacuum, some of the screws on the back panel have to be removed. This guide will show you how to remove the screws from the back panel on your Shark Rocket Powerhead AH401.

Abschnitte
Werkzeuge

Schritt 1 Back Panel Screws  ¶ 

Flip the device over so that the bottom is face up. Remove the eight screws shown by rotating counter-clockwise with a T15 Torx screwdriver.

Schritt 1 Back Panel Screws  ¶ 

  • Flip the device over so that the bottom is face up.

  • Remove the eight screws shown by rotating counter-clockwise with a T15 Torx screwdriver.

  • Two 14 mm Torx screws

  • Two 16 mm Torx screws

  • Four 21 mm Torx screws