Zum Hauptinhalt wechseln
Hilfe

Lenovo IdeaCentre AIO 510S-23ISU Back Cover Replacement

This is a preliminary guide for removing the back cover to access the inside of the computer.

  • Autor: Jackson Blake
  • Geschätzte Zeit: 1 - 2 Minuten
  • Schwierigkeitsgrad: Einfach

This part requires a phillips head screwdriver to remove the screws as well as a plastic spudger.

Schritt 1 Back Cover  ¶ 

Remove the two screws on the bottom of the computer, one on each side.

Schritt 1 Back Cover  ¶ 

  • Remove the two screws on the bottom of the computer, one on each side.

Schritt 2  ¶ 

Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Schritt 2  ¶ 

  • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Schritt 3  ¶ 

Once it has been separated, lift to remove. Once it has been separated, lift to remove.

Schritt 3  ¶ 

  • Once it has been separated, lift to remove.