Zum Hauptinhalt wechseln
Hilfe

Hoover Power Path Pro Advanced Hose Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Fehlende Schritte

Fehlende Schritte

Ups! In dieser Anleitung fehlen momentan einige wichtige Schritte.

This guide will show how to replace the hose on your Hoover Power Path Pro Advanced.

The hose creates a pathway for water to flow from the dirty and clean water tanks on your Hoover Power Path Pro Advanced. However, if there is a puncture in the hose, then it needs to be replaced.

Abschnitte
Werkzeuge

Schritt 1 Hose  ¶ 

Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

Schritt 1 Hose  ¶ 

  • Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

  • They will also be indicated on the bottom of the vacuum.

Schritt 2  ¶ 

Pull the red handle shown to remove the front suction unit from the cleaner. Pull the red handle shown to remove the front suction unit from the cleaner.

Schritt 2  ¶ 

  • Pull the red handle shown to remove the front suction unit from the cleaner.

Schritt 3  ¶ 

Unscrew the Phillips #2 screw at the bottom of the hose.

Schritt 3  ¶ 

  • Unscrew the Phillips #2 screw at the bottom of the hose.

Schritt 4  ¶ 

Grab the attachment at tip of the hose and unscrew it.  Pull outwards  on the hose until completely removed.

Schritt 4  ¶ 

  • Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.