Zum Hauptinhalt wechseln
Hilfe

Dell Alienware 13 R2 Solid-State Drive Replacement

Fehlende grundständige Anleitungen

Fehlende grundständige Anleitungen

In dieser Anleitung fehlen Informationen, wie man am besten anfängt. Erstelle eine grundständige Anleitung!

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Fehlende Angaben

Fehlende Angaben

Einige Details dieser Anleitung fehlen. Hilf Nutzern, indem du Werkzeuge, den Schwierigkeitsgrad oder die benötigte Zeit hinzufügst.

Dell Alienware 13 R2 Solid-State Drive Replacement

  • Autor: Terrence15
  • Geschätzte Zeit: 10 Minuten - 1 Stunde
  • Schwierigkeitsgrad: Moderat

In this guide, we will be removing and replacing the solid-state drive.

Schritt 1 Removing the Screws  ¶ 

WARNING: Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. Remove the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Schritt 1 Removing the Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Remove the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Schritt 2 Peel off Computer Base Tabs  ¶ 

Using the pull tab, pivot the solid-state drive bracket and peel off the  bracket from the tabs on the computer base. Using the pull tab, pivot the solid-state drive bracket and peel off the  bracket from the tabs on the computer base.

Schritt 2 Peel off Computer Base Tabs  ¶ 

  • Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.

Schritt 3 Disconnecting the Solid-State Drive Cable  ¶ 

Using the pull tab, disconnect the solid-state drive cable from the system  board.

Schritt 3 Disconnecting the Solid-State Drive Cable  ¶ 

  • Using the pull tab, disconnect the solid-state drive cable from the system board.

Schritt 4 Removing the Solid-State Drive  ¶ 

Remove the screws that secure the solid-state drive assembly to the  computer base. Remove the screws that secure the solid-state drive assembly to the  computer base.

Schritt 4 Removing the Solid-State Drive  ¶ 

  • Remove the screws that secure the solid-state drive assembly to the computer base.

Schritt 5 Lifting the Solid-State Assembly  ¶ 

Lift the solid-state drive assembly off the computer base.

Schritt 5 Lifting the Solid-State Assembly  ¶ 

  • Lift the solid-state drive assembly off the computer base.

Schritt 6 Remove the Screw  ¶ 

Remove the screw that secures the solid-state drive to the solid-state  drive assembly.

Schritt 6 Remove the Screw  ¶ 

  • Remove the screw that secures the solid-state drive to the solid-state drive assembly.

Schritt 7 Lift the Solid-State Assembly.  ¶ 

Slide and lift the solid-state drive off the solid-state drive assembly. Slide and lift the solid-state drive off the solid-state drive assembly.

Schritt 7 Lift the Solid-State Assembly.  ¶ 

  • Slide and lift the solid-state drive off the solid-state drive assembly.

Schritt 8 The New Solid-State Drive  ¶ 

Slide the NEW solid-state drive into the slot on the solid-state drive assembly.

Schritt 8 The New Solid-State Drive  ¶ 

  • Slide the NEW solid-state drive into the slot on the solid-state drive assembly.

Schritt 9 Screw Replacement  ¶ 

Replace the screw that secures the solid-state drive to the solid-state drive  assembly. Replace the screw that secures the solid-state drive to the solid-state drive  assembly.

Schritt 9 Screw Replacement  ¶ 

  • Replace the screw that secures the solid-state drive to the solid-state drive assembly.

Schritt 10 Align the Screws  ¶ 

Align the screw holes on the solid-state drive assembly with the screw  holes on the computer base. Align the screw holes on the solid-state drive assembly with the screw  holes on the computer base.

Schritt 10 Align the Screws  ¶ 

  • Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.

Schritt 11 Replace the Screws  ¶ 

Replace the screws that secure the solid-state drive assembly to the  computer base.

Schritt 11 Replace the Screws  ¶ 

  • Replace the screws that secure the solid-state drive assembly to the computer base.

Schritt 12 Connect the Cable to the System Board  ¶ 

Connect the solid-state drive cable to the system board.

Schritt 12 Connect the Cable to the System Board  ¶ 

  • Connect the solid-state drive cable to the system board.

Schritt 13 Align the Screw Holes  ¶ 

Align the screw holes on the solid-state drive bracket with the screw holes  on the solid-state drive assembly.

Schritt 13 Align the Screw Holes  ¶ 

  • Align the screw holes on the solid-state drive bracket with the screw holes on the solid-state drive assembly.

Schritt 14 Replace the Screws  ¶ 

Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly. Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Schritt 14 Replace the Screws  ¶ 

  • Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.