Zum Hauptinhalt wechseln
Hilfe

Dell Alienware 13 R2 Display Assembly Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Fehlende grundständige Anleitungen

Fehlende grundständige Anleitungen

In dieser Anleitung fehlen Informationen, wie man am besten anfängt. Erstelle eine grundständige Anleitung!

Fehlende Angaben

Fehlende Angaben

Einige Details dieser Anleitung fehlen. Hilf Nutzern, indem du Werkzeuge, den Schwierigkeitsgrad oder die benötigte Zeit hinzufügst.

Dell Alienware 13 R2 Display Assembly Replacement

  • Autor: Terrence15
  • Geschätzte Zeit: 15 Minuten - 2 Stunden
  • Schwierigkeitsgrad: Moderat

In this guide, we will be showing you how to replace the Display Assembly.

Abschnitte

Schritt 1 Open the Display  ¶ 

Kein Bild

Schritt 1 Open the Display  ¶ 

Schritt 2 Remove the Screws  ¶ 

Remove the screws that secure the hinge caps to the display hinges. Remove the screws that secure the hinge caps to the display hinges.

Schritt 2 Remove the Screws  ¶ 

  • Remove the screws that secure the hinge caps to the display hinges.

Schritt 3 Lifting the Hinge Caps  ¶ 

Slide and lift the hinge caps off the display hinges.

Schritt 3 Lifting the Hinge Caps  ¶ 

  • Slide and lift the hinge caps off the display hinges.

Schritt 4 Close the Display  ¶ 

Kein Bild

Schritt 4 Close the Display  ¶ 

  • Close the display and turn the computer over.

Schritt 5 Remove the Screw  ¶ 

Remove the screw that secures the wireless-card bracket to the wireless  card. Remove the screw that secures the wireless-card bracket to the wireless  card.

Schritt 5 Remove the Screw  ¶ 

  • Remove the screw that secures the wireless-card bracket to the wireless card.

Schritt 6 Disconnect the Antenna Cables  ¶ 

Disconnect the antenna cables from the wireless card.

Schritt 6 Disconnect the Antenna Cables  ¶ 

  • Disconnect the antenna cables from the wireless card.

Schritt 7 Turn the Computer Over  ¶ 

Kein Bild

Schritt 7 Turn the Computer Over  ¶ 

  • Turn the computer over and open the display.

Schritt 8 Remove the Antenna Cables  ¶ 

Remove the antenna cables from the routing guides on the display hinges.

Schritt 8 Remove the Antenna Cables  ¶ 

  • Remove the antenna cables from the routing guides on the display hinges.

Schritt 9 Disconnect the Display Cable  ¶ 

Lift the connector latch and disconnect the display cable from the system  board. Lift the connector latch and disconnect the display cable from the system  board.

Schritt 9 Disconnect the Display Cable  ¶ 

  • Lift the connector latch and disconnect the display cable from the system board.

Schritt 10 Remove the Display Cable  ¶ 

Remove the display cable from the routing guides on the display hinges. Remove the display cable from the routing guides on the display hinges.

Schritt 10 Remove the Display Cable  ¶ 

  • Remove the display cable from the routing guides on the display hinges.

Schritt 11 Disconnect the Logo-Board Cable  ¶ 

Disconnect the logo-board cable from the system board and remove it  from the routing guides on the display hinges.

Schritt 11 Disconnect the Logo-Board Cable  ¶ 

  • Disconnect the logo-board cable from the system board and remove it from the routing guides on the display hinges.

Schritt 12 Remove the Screws  ¶ 

Remove the screws that secure the display assembly to the computer  base.

Schritt 12 Remove the Screws  ¶ 

  • Remove the screws that secure the display assembly to the computer base.

Schritt 13 Lifting the Display Assembly  ¶ 

Kein Bild

Schritt 13 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the computer base.

Schritt 14 Align the Screw Holes  ¶ 

Align the screw holes on the display hinges with the screw holes on the  computer base.

Schritt 14 Align the Screw Holes  ¶ 

  • Align the screw holes on the display hinges with the screw holes on the computer base.

Schritt 15 Replace the Screws  ¶ 

Replace the screws that secure the display hinges to the computer base.

Schritt 15 Replace the Screws  ¶ 

  • Replace the screws that secure the display hinges to the computer base.

Schritt 16 Routing the Logo-Board Cable  ¶ 

Route the logo-board cable through the routing guides on the display  hinge and connect the logo-board cable to the system board.

Schritt 16 Routing the Logo-Board Cable  ¶ 

  • Route the logo-board cable through the routing guides on the display hinge and connect the logo-board cable to the system board.

Schritt 17 Route the Cable  ¶ 

Route the display cable through the routing guides on the display hinge.

Schritt 17 Route the Cable  ¶ 

  • Route the display cable through the routing guides on the display hinge.

Schritt 18 Slide the Display Cable  ¶ 

Slide the display cable into the connector on the system board and press down the latch to secure the cable.

Schritt 18 Slide the Display Cable  ¶ 

  • Slide the display cable into the connector on the system board and press down the latch to secure the cable.

Schritt 19 Route the Antenna Cables  ¶ 

Kein Bild

Schritt 19 Route the Antenna Cables  ¶ 

  • Route the antenna cables through the routing guides on the display hinges.

Schritt 20 Adhere the Adhesive Tapes  ¶ 

Adhere the adhesive tapes that secure the antenna cables to the system  board.

Schritt 20 Adhere the Adhesive Tapes  ¶ 

  • Adhere the adhesive tapes that secure the antenna cables to the system board.

Schritt 21 Close the Display  ¶ 

Kein Bild

Schritt 21 Close the Display  ¶ 

  • Close the display and turn the computer over.

Schritt 22 Connect the Antenna Cables  ¶ 

Kein Bild

Schritt 22 Connect the Antenna Cables  ¶ 

  • Connect the antenna cables to the wireless card.

Schritt 23 Replace the Screw  ¶ 

Kein Bild

Schritt 23 Replace the Screw  ¶ 

  • Replace the screw that secures the wireless-card bracket to the wireless card.

Schritt 24 Open the Display  ¶ 

Kein Bild

Schritt 24 Open the Display  ¶ 

  • Turn the computer over and open the display.

Schritt 25 Align the Screw Holes  ¶ 

Align the screw holes on the hinge caps with the screw holes on the  display hinges.

Schritt 25 Align the Screw Holes  ¶ 

  • Align the screw holes on the hinge caps with the screw holes on the display hinges.

Schritt 26 Replace the Screws  ¶ 

Kein Bild

Schritt 26 Replace the Screws  ¶ 

  • Replace the screws that secure the hinge caps to the display hinges.