Zum Hauptinhalt wechseln
Hilfe

Dell Alienware 13 R3 System Board Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Rundreise

Rundreise

Die Vorgehensweise in dieser Anleitung ist nicht der effizienteste Weg, um die Sache zu erledigen, aber kann unter Umständen dennoch nützlich sein.

In this guide, we wills how you how to remove and replace the System Board.

  • Autor: Terrence15
  • Geschätzte Zeit: 20 Minuten - 2 Stunden
  • Schwierigkeitsgrad: Moderat

In this guide, we wills how you how to remove and replace the System Board.

Abschnitte
Abschnitte (fortgesetzt)
Werkzeuge

Schritt 1 Turn the Computer Over  ¶ 

WARNING: Before working inside your computer, read the safety  information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your  computer, follow the instructions in After Working Inside Your Computer.

Schritt 1 Turn the Computer Over  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.

  • NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board.

  • NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board.

  • CAUTION: Place the computer on a clean, flat surface.

  • Turn the computer over.

Schritt 2 Disconnecting the Logo-Board Cable  ¶ 

Disconnect the logo-board cable from the system board.

Schritt 2 Disconnecting the Logo-Board Cable  ¶ 

  • Disconnect the logo-board cable from the system board.

Schritt 3 Disconnecting the Power-Button Board Cable  ¶ 

Using the pull-tab, disconnect the power-button board cable from the system  board.

Schritt 3 Disconnecting the Power-Button Board Cable  ¶ 

  • Using the pull-tab, disconnect the power-button board cable from the system board.

Schritt 4 Open the Latch  ¶ 

Open the latch and disconnect the display cable from the system board.

Schritt 4 Open the Latch  ¶ 

  • Open the latch and disconnect the display cable from the system board.

Schritt 5 Turn the Computer Over  ¶ 

Turn the computer over.

Schritt 5 Turn the Computer Over  ¶ 

  • Turn the computer over.

Schritt 6 Remove the Screw  ¶ 

Remove the screw (M2.5x6L) that secures the USB Type-C port bracket to  the system board and lift the USB Type-C port bracket off the system board.

Schritt 6 Remove the Screw  ¶ 

  • Remove the screw (M2.5x6L) that secures the USB Type-C port bracket to the system board and lift the USB Type-C port bracket off the system board.

Schritt 7 Disconnecting the Power-Adapter Port  ¶ 

Kein Bild

Schritt 7 Disconnecting the Power-Adapter Port  ¶ 

  • Disconnect the power-adapter port cable from the system board.

Schritt 8 Disconnect the Speaker Cable  ¶ 

Disconnect the speaker cable from the system board.

Schritt 8 Disconnect the Speaker Cable  ¶ 

  • Disconnect the speaker cable from the system board.

Schritt 9 Open the Latch  ¶ 

Open the latch and disconnect the keyboard cable from the system board.

Schritt 9 Open the Latch  ¶ 

  • Open the latch and disconnect the keyboard cable from the system board.

Schritt 10 Open the Latch  ¶ 

Open the latch and disconnect the keyboard-backlight cable from the system  board.

Schritt 10 Open the Latch  ¶ 

  • Open the latch and disconnect the keyboard-backlight cable from the system board.

Schritt 11 Disconnect the Touch-Pad Cable  ¶ 

Open the latch and disconnect the touch-pad cable from the system board.

Schritt 11 Disconnect the Touch-Pad Cable  ¶ 

  • Open the latch and disconnect the touch-pad cable from the system board.

Schritt 12 Remove the Screw  ¶ 

Remove the screw (M2.5x6L) that secures the USB Type-C port bracket to  the system board and lift the USB Type-C port bracket off the system board.

Schritt 12 Remove the Screw  ¶ 

  • Remove the screw (M2.5x6L) that secures the USB Type-C port bracket to the system board and lift the USB Type-C port bracket off the system board.

Schritt 13 Remove the two Screws  ¶ 

Remove the two screws (M2.5x6L) that secure the system board to the palm- rest assembly.

Schritt 13 Remove the two Screws  ¶ 

  • Remove the two screws (M2.5x6L) that secure the system board to the palm- rest assembly.

Schritt 14 Lift the System Board  ¶ 

Lift the system board off the palm-rest assembly.

Schritt 14 Lift the System Board  ¶ 

  • Lift the system board off the palm-rest assembly.

Schritt 15 Align the Screw Holes  ¶ 

CAUTION: Ensure that no cables are under the system board.

Schritt 15 Align the Screw Holes  ¶ 

  • CAUTION: Ensure that no cables are under the system board.

  • Align the screw holes on the NEW system board with the screw holes on the palm- rest assembly.

Schritt 16 Replace the Two Screws  ¶ 

Replace the two screws (M2.5x6L) that secure the system-board to the palm- rest assembly.

Schritt 16 Replace the Two Screws  ¶ 

  • Replace the two screws (M2.5x6L) that secure the system-board to the palm- rest assembly.

Schritt 17 Align the Screw Hole  ¶ 

Align the screw hole on the USB Type-C port bracket with the screw hole on  the system board on the back and right side of your computer.

Schritt 17 Align the Screw Hole  ¶ 

  • Align the screw hole on the USB Type-C port bracket with the screw hole on the system board on the back and right side of your computer.

Schritt 18 Replace the Screw  ¶ 

Replace the screw (M2.5x6L) that secures the USB Type-C port bracket to  the system board on the back and right side of your computer.

Schritt 18 Replace the Screw  ¶ 

  • Replace the screw (M2.5x6L) that secures the USB Type-C port bracket to the system board on the back and right side of your computer.

Schritt 19 Slide the Touch-Pad Cable  ¶ 

Kein Bild

Schritt 19 Slide the Touch-Pad Cable  ¶ 

  • Slide the touch-pad cable into the connector on the system board and close the latch to secure the cable.

Schritt 20 Sliding the Keyboard-Backlight  ¶ 

Slide the keyboard-backlight cable into the connector on the system board  and close the latch to secure the cable.

Schritt 20 Sliding the Keyboard-Backlight  ¶ 

  • Slide the keyboard-backlight cable into the connector on the system board and close the latch to secure the cable.

Schritt 21 Slide the Keyboard Cable  ¶ 

Slide the keyboard cable into the connector on the system board and close  the latch to secure the cable.

Schritt 21 Slide the Keyboard Cable  ¶ 

  • Slide the keyboard cable into the connector on the system board and close the latch to secure the cable.

Schritt 22 Connect the Speaker Cable  ¶ 

Kein Bild

Schritt 22 Connect the Speaker Cable  ¶ 

  • Connect the speaker cable to the system board.

Schritt 23 Connect the Power-Adapter  ¶ 

Kein Bild

Schritt 23 Connect the Power-Adapter  ¶ 

  • Connect the power-adapter port cable to the system board.

Schritt 24 Turn the Computer Over  ¶ 

Turn the computer over.

Schritt 24 Turn the Computer Over  ¶ 

  • Turn the computer over.

Schritt 25 Slide the Display Cable  ¶ 

Kein Bild

Schritt 25 Slide the Display Cable  ¶ 

  • Slide the display cable into the connector on the system board and close the latch to secure the cable.

Schritt 26 Connect the Power-Button Board Cable  ¶ 

Kein Bild

Schritt 26 Connect the Power-Button Board Cable  ¶ 

  • Connect the power-button board cable to the system board.

Schritt 27 Connect the Logo-Board Cable  ¶ 

Kein Bild

Schritt 27 Connect the Logo-Board Cable  ¶ 

  • Connect the logo-board cable to the system board.