Zum Hauptinhalt wechseln
Hilfe

Dell Alienware 13 R3 Display Assembly Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Rundreise

Rundreise

Die Vorgehensweise in dieser Anleitung ist nicht der effizienteste Weg, um die Sache zu erledigen, aber kann unter Umständen dennoch nützlich sein.

Fehlende Angaben

Fehlende Angaben

Einige Details dieser Anleitung fehlen. Hilf Nutzern, indem du Werkzeuge, den Schwierigkeitsgrad oder die benötigte Zeit hinzufügst.

This guide shows how to remove and replace the display assembly for the Dell Alienware 13 R3.

  • Autor: Terrence15
  • Geschätzte Zeit: 15 Minuten - 2 Stunden
  • Schwierigkeitsgrad: Moderat

In this guide, we will show how to remove and replace the Display Assembly.

Abschnitte
Abschnitte (fortgesetzt)
Werkzeuge

Schritt 1 Remove the Antenna Cables  ¶ 

WARNING: Before working inside your computer, read the safety  information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your  computer, follow the instructions in After Working Inside Your Computer.

Schritt 1 Remove the Antenna Cables  ¶ 

Schritt 2 Remove the Logo-Board Cable  ¶ 

Remove the logo-board cable from the routing guides on the palm-rest  assembly.

Schritt 2 Remove the Logo-Board Cable  ¶ 

  • Remove the logo-board cable from the routing guides on the palm-rest assembly.

Schritt 3 Remove the Display Cable  ¶ 

Remove the display cable from the routing guides on the palm-rest assembly.

Schritt 3 Remove the Display Cable  ¶ 

  • Remove the display cable from the routing guides on the palm-rest assembly.

Schritt 4 Turn the Computer Over  ¶ 

CAUTION: Place the computer on a clean, flat surface.

Schritt 4 Turn the Computer Over  ¶ 

  • CAUTION: Place the computer on a clean, flat surface.

  • Turn the computer over.

Schritt 5 Remove the Four Screws  ¶ 

Remove the four screws (M2.5x6L) that secure the display assembly to the  palm-rest assembly.

Schritt 5 Remove the Four Screws  ¶ 

  • Remove the four screws (M2.5x6L) that secure the display assembly to the palm-rest assembly.

Schritt 6 Lifting the Display Assembly  ¶ 

Lift the display assembly off the palm-rest assembly.

Schritt 6 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the palm-rest assembly.

Schritt 7 Remove the Cables  ¶ 

Remove the cables from the routing holes on the palm-rest assembly.

Schritt 7 Remove the Cables  ¶ 

  • Remove the cables from the routing holes on the palm-rest assembly.

Schritt 8 Placing the Display  ¶ 

Place the display assembly on a clean, flat surface.

Schritt 8 Placing the Display  ¶ 

  • Place the display assembly on a clean, flat surface.

Schritt 9 Route the Cables  ¶ 

Route the cables through the routing holes on the palm-rest assembly.

Schritt 9 Route the Cables  ¶ 

  • Route the cables through the routing holes on the palm-rest assembly.

Schritt 10 Align the Screw Holes  ¶ 

Align the screw holes on the display hinges with the screw holes on the palm- rest assembly.

Schritt 10 Align the Screw Holes  ¶ 

  • Align the screw holes on the display hinges with the screw holes on the palm- rest assembly.

Schritt 11 Replace the Four Screws  ¶ 

Replace the four screws (M2.5x6L) that secure the display assembly to the  palm-rest assembly.

Schritt 11 Replace the Four Screws  ¶ 

  • Replace the four screws (M2.5x6L) that secure the display assembly to the palm-rest assembly.

Schritt 12 Turn the Computer Over  ¶ 

Turn the computer over.

Schritt 12 Turn the Computer Over  ¶ 

  • Turn the computer over.

Schritt 13 Route the Logo-Board Cable  ¶ 

Route the logo-board cable through the routing guides on the palm-rest  assembly.

Schritt 13 Route the Logo-Board Cable  ¶ 

  • Route the logo-board cable through the routing guides on the palm-rest assembly.

Schritt 14 Route the Antenna Cables  ¶ 

Route the antenna cables through the routing guides on the palm-rest  assembly.

Schritt 14 Route the Antenna Cables  ¶ 

  • Route the antenna cables through the routing guides on the palm-rest assembly.